15kV switch insulator

15kV switch insulator

 Product technical parameters:

  1. The demoulding Angle is 1°-2°

2. APG epoxy casting process should be used

3. If the rounded corners are not marked, they are all R1

4. After pouring, there should be no air leakage on each joint surface

5. The tensile strength of the part is greater than or equal to 70MPa

6. Its insulation strength is greater than or equal to 25kv/mm

7. 1min power frequency withstand voltage is 45KV

8. The lightning impulse withstand voltage is 110KV

9. Partial discharge should be less than or equal to 5pC

10. The indicator light voltage of the display is 6V-70V